Custom Tail Membrane Switch Keypad

Custom Tail Membrane Switch Keypad

Flat Push Buttons Membrane Switch mean Non-Tactile Membrane Switches.

A non-tactile switch is just the opposite of tactile switches, it temporarily closes the circuit when pressed, the upper and lower circuit is separated by a spacer.

Tactile switches are ones that provide tactile feedback when being pressed. This usually means a distinct snap. Generally, this is done with the help of a metal dome beneath the switch. They close the circuit when pressed and open it again upon being released.

Polyester domes are another common option. Poly dome tend to rely on printed silver ink that is etched onto the underside of the domes.

To Get Expert Help with Designing Your Membrane Switches, pls provide us below information:

1.The scale dimension drawing

2.The material

3.The buttons embossed or flat, whether with metal domes

4.The total thickness

5.Please marked the outlet position

6.The length of the tail and tail pitch is 2.54mm or 1.0mm

7. Please marked the front panel or graphic overlay Pantone color number

8.The function diagram

9. Other requirements

Custom Complex Membrane Switch Designs

A basic switch keypad and membrane switch panel aren't always enough for an effective interface.

Instead, a multi layered switch sometimes necessary as below:

• Shielding

ESD (Electrostatic Discharge Materials)

EMI (Electromagnetic Interference)

• Embedded Components

LEDs

Resistors

Light Sensors

• Programmable Chips

For these kinds of custom membrane switch keyboards, we usually utilize PCBs or copper flex to create the circuit layers.

Environmental Considerations of Membrane Switches

We Kaike pride ourselves on designing membrane switches that aren't just easy to use but easy to use for many years. Even if your operators will interact with them multiple times an hour, Kaike Technology can create custom switches that will keep pace easily.

Custom Membrane Switch Manufacturer

Customized membrane switches can be with embossed keys, glossy or matte texture, LED light or Bi-color LED, Transparent front windows, Female or Male Contact, Crimp or Pin, Housing or Connector, ZIF–Zero Insertion Force Connectors, Super Slim LED, Integrated Crimp Connector, Pin Header, Spacer Adhesive, Metal Dome or Disc Array and Cable Assembly etc. for your choose.

We are the industry mainly of Membrane Switch, Flexible Circuit, Touch Panel,

Printed Circuit Boards and Printed Circuit Board Assemblies, Injection Molded parts/ IMD/ Plastic Injection Parts...

Talk to an Expert About Your Custom Membrane Switches by Email Us or send us an Inquiry at Any Time and We'll Reply You Within 2 Hours.