How to use Membrane Switch and precautions

Membrane Switch has good waterproof, dust-proof, oil-proof, anti-harmful gas erosion, stable and reliable performance, lightweight, small size, long life, convenient assembly and connection, the panel can be washed without the characters being damaged, the color is rich, the appearance is elegant, etc. advantage. Use the Membrane Switch to make your products more contemporary. The main type of Membrane Switch panel is a rigid or flexible printed circuit board as the base, with touch or no touch buttons installed, and then covered with a plastic film panel printed with colorful decorative patterns, which integrates switch functions It is a new type of man-machine dialogue interface that integrates decorative functions as an electronic component. The connection between the switch circuit and the whole machine can be done by welding or plugging. So what are the usage and precautions of Membrane Switch? Let's take a look.

Here is the content:

Method steps

Precautions

Method steps

1. Clean the surface that the Membrane Switch needs to be attached to (the surface to be attached is required to be flat, rust-free, oil-free, and dust-free);

2. Compare the size (put the Membrane Switch on the place to be pasted to compare the size and position);

3. Peel off the centrifuge paper from the bottom of the Membrane Switch by about 10mm;

4. Then put the Membrane Switch at the corresponding position and stick it to a part, and then slowly tear off the remaining centrifugal paper (under the condition that the angle cannot exceed 15 degrees), and then stick it to the corresponding position in turn.

5. During the pasting process, if the Membrane Switch with the centrifugal paper on the reverse side is torn off, it needs to be placed first, and the reverse side should be placed up to prevent it from sticking to other objects and affecting the pasting;

6. The pasting operation cannot be repeated, it needs to be done at one time; the tearing angle cannot exceed 15 degrees; when trying to press the feel, it must be placed flat on the table before pressing, and cannot be pressed in the air, otherwise, it will affect the Custom Membrane Switch the lifespan of the Switch.

Precautions

1. The bubble film lined between the Membrane Switch and the Membrane Switch is to reduce the pressure of the button and prevent it from failure, and should be retained;

2. The transparent film on the front and back of the Membrane Switch is to protect the display window of the Membrane Switch, do not tear it off easily;

3. After taking out a few of the Membrane Switches, they should be bundled as they are, but they must not be bundled too tightly;

4. Film surface stickers and film switches that have a feel and a large number need to be boxed and placed vertically to prevent the keys from failing under heavy pressure for a long time;

5. The outlet of the Membrane Switch should be protected, and the outlet should not be placed downward;

6. Membrane Switches with display windows should prevent the material from being bent under force when handling and placing, which will leave creases;

7. The Membrane Switch should be stored indoors at room temperature and should be treated with dust and moisture-proof treatment, and there should be no acid, alkali, or other corrosive gases in the surrounding air.

The above is about the usage and precautions of Membrane Switch. If you are interested in LED Membrane Switch and Custom Membrane Switch, you can contact us. Our website is www.kkeyboards.com. I look forward to your arrival very much and hope to cooperate with you.