Backlit Membrane Electroluminescent (EL) Lighting Panel

EL(Electro Luminescent) ectroluminescent light panels

Electroluminescence (EL) is short for EL. EL cold light sheet is a physical phenomenon that the electric field generated by the AC voltage applied to the electrodes at both ends excites the luminescence of fluorescent substances, that is, electric field luminescence. It combines a variety of substances to produce light sources with different colors. It has the characteristics of low power consumption, soft light, no ultraviolet rays, various colors, long service life and no heat generation. Therefore, commonly known as cold light source, cold light source is different from the traditional point or line light-emitting mechanism, but a uniform and integral surface light-emitting body. It is also a kind of light source that will not cause glare to vision, is not harmful and elastic, and can be cut into any complex shape.

Editing and broadcasting of technical parameters

Working parameters

1. Initial brightness: ≥ 30CD, and the maximum brightness after pressurization is 750cd

2. Voltage range: ac50v-220v

3. Frequency range: 200hz-1500hz

4. Power: ≤ 0.8mw/cm

5. Current: ≤ 0.15ma/cm

6. Thickness: ≤ 0.5mm

Drive parameters

1. Input voltage range: 50v-220v

2. Output voltage range: 80v-180v

3. Frequency: 400hz-1000hz

4. Output power: 1-1200w

Our other services:

1) PCB or flexible PCB - incorporate your membrane switch onto a PCB for ease of connection and to reduce the cost of a separate control board.
2) Metal or plastic back panels - Increase the rigidity of the membrane and allows for ease of assembly to a casing.
3) Light Emitting Diodes (LED)
4) Integrated Electronics - incorporate metal domes, LEDs, resistors or other SMD components into your Graphic membrane panels.
5) Shielding - To meet your ESD, EMI or RFI requirements
6) Integration with touchscreens - Adding membrane switch keys or buttons to supplement your touchscreens or touch screens