Frequently Asked Questions on Touch Screen
Home » Marketing leaders in HMI » Frequently Asked Questions on Touch Screen
Add : Haining Agricultural Development Zone 314423, Zhejiang, China
P.C. : 314423
Phone : +86-15158112598
E-mail : Sales@hnkaike.cn

Frequently Asked Questions on Touch Screen

Views: 0     Author: Site Editor     Publish Time: 2022-05-13      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Most of the Touch Screens are employed publicly places. Because of the surroundings, human operation, and different reasons, there square measure usually some issues throughout use. Let's take a glance at the frequently asked questions on Touch Screen.

Touch Screen

Here is the content:

No response to the touch when mistreatment it for a moment

Problems associated with hardware Touch Screen

Other connected queries


No response to the touch when mistreatment it for a moment


(1) Throughout the semipermanent use of electrical phenomenon screen instrumentality, because of the buildup of electricity on the screen and also the control circuit, the whole instrumentality is roofed with electricity. Serious deviations or perhaps failures. At this point, close up the ability of the device, discharge the within and outdoors of the screen with wires to eliminate an outsized quantity of electricity, then activate the ability of the device to restart.

(2) Throughout the operation of the Sonic Touch Screen, because of the buildup of an excessive amount of dirt on the surface, if it's not wiped ofttimes, it'll additional or less block the reception and reflection of some sound waves, which can conjointly cause the sensitivity of the screen to decrease, leading to abnormal use. When moving down, you can use a clean towel or card to carefully dirt off the surface of the screen and also the encompassing space, then restart the machine, and it'll typically work ordinarily.


Hardware connected problems Touch Screen


Generally, the port is employed for signal transmission, and also the operating signal is taken from the PS2/port. If the indicator light-weight isn't on, it means the signal isn't obtained or the PS2/line on the management box is also broken. If the port is broken or disabled, the motive force can't be put in, and also the interface or leads is replaced. If the screen is slightly malformed by being squeezed, it's a result of the bit space being ironed by the monitor casing or the cupboard casing, which can result in the shortcoming to find the Touch Screen pointer. Or increase the space between the cupboard and also the monitor screen to handle it.


Other connected queries


The Touch Screen pointer solely moves in a very tiny space or the Touch Screen is inaccurate. To run the Touch Screen standardization program, when dynamic the show resolution, it's found that some areas of the big screen can't be touched in the slightest degree, it should be that the Touch Screen is broken, please replace the Touch Screen.


We primarily do tailor-made Interface products and supply samples in line with your style. meanwhile, our engineers will assist you to develop your Interface ideas still. The above is about the frequently asked questions on Touch Screen, if you're curious about ITO Touch Screen, Transparent Light Touch Switch, ITO Touch Keyboard, or Mobile Phone Touch Panel, you can contact us, our website is www.kkeyboards.com. I look forward to your arrival very much and hope to cooperate with you.


Home
Add:  Haining Agricultural Development Zone 314423, Zhejiang, China  
Tel: +86-15158112598 / WeChat /WhatsApp
E-mailinfo@hzkaike.cn
Copyright  2022 Zhejiang KaiKe Technology  Co.,Ltd. All rights reserved.  Sitemap